Echo CS-310 Service Manual page 52

50
7-5 Replacing auto-oiler assembly (continued)
H
K
SAW CHAIN LUBRICATION SYSTEM
K
k
7. Set new auto-oiler (H) in engine cover, aligning
oil groove (h) with the rib (J).
NOTE: If oil groove is not aligned with the rib,
chain oil does not fl ow.
h
8. Set tip (k) of auto-oiler installer X646-000030 (K)
in the bore of new auto-oiler (H).
9. Tap auto-oiler installer (K) with small metal hum-
mer, until it bottoms.
CS-310
H
J