Replacing Starter Rope - Echo CS-310 Service Manual

CS-310

2-2 Replacing starter rope

C
4K287
D
STARTER SYSTEM
A
B
D
1. Pull out and untie knot (A).
2. Pull knot (B) to remove rope from rope reel (C).
3. When installing a new starter rope, singe both
ends of the rope to prevent fraying.
4. Make a knot (D) at end of starter rope and pass
the rope through hole of rope reel, then press the
knot (D) into recess as shown.
5. Pass the other end of starter rope through start-
er case, then pass starter rope through starter grip
and make a knot as shown.
6. Tighten knot. Push knot into recess of starter
grip.
9