Echo CS-310 Service Manual page 43

CS-310
5-3 Installing clutch assembly (Continued)
g
fl at side
H
CLUTCH SYSTEM
F
G
H
convexed side
smoother side
6. Apply lithium-based grease to needle bearing (F).
Install clutch drum (G) and needle bearing (F) on
crankshaft, placing the hands (a) of worm gear (A)
in cutouts (g) of clutch drum.
g
7. Install washer (H), facing fl at side (not convexed
J
side) to clutch drum (G).
8. Install new E-ring (J), facing rounded edge side
to washer (H). Use a new E-ring every time E-ring
is removed.
9. Remove piston stopper and reinstall all removed
parts.
J
41