Specifications - Hover-1 MAVERICK Original Instruction

OPERATING PRINCIPALS
The Maverick uses digital electronic gyroscopes and acceleration
sensors to control balance and motion, depending on the user's
center of gravity. The Maverick also uses a control system to drive
the motors that are located within the wheels. The Maverick has a
built-in inertia dynamic stabilization system that can help assist with
balance when moving forward and backwards, but not while
turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Incline Angle:
Minimum Turning Radius:
Maximum Continuous
Rated Power:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Platform Height:
Tire Type:
WARNING
Any Maverick that does not work properly
can cause you to lose control and fall.
Inspect the entire Maverick thoroughly
before every ride, and do not ride it until
any problems have been corrected.

SPECIFICATIONS

Hover-1 Maverick (EU-H1-MAVE)
™
15 lbs (6.8 kg)
44-160 lbs (20-72.5 kg)
Up to 7 mph (11.3 km/h)
Up to 3 miles (4.8 km)
10°
0°
200 W
Up to 6 hours
Lithium-ion
36 V
2.0Ah
AC 100-240V, 50/60Hz
1.5 Inches (3.81 cm)
4.5 Inches (11.43 cm)
Non-Pneumatic Solid Tires
5