Table of Contents
Advertisement
Viewing and Deleting Images Captured
Continuously (Sequence)
Viewing Images in a Sequence
Images captured continuously are saved as a sequence.
The first image of a sequence is used as the key picture
to represent the sequence when displayed in full-
frame playback mode or thumbnail playback mode
(default setting).
To display each image in the sequence individually,
press the k button.
After pressing the k button, the operations listed
below are available.
To display the previous or next image, rotate the
multi selector or press JK.
To display images that are not included in the
sequence, press H to return to the key picture
display.
To display images in a sequence as thumbnails, or to
play them back in a slide show, set Sequence
display options (A160) to Individual pictures in the playback menu.
B
Sequence Display Options
Images captured continuously with cameras other than this camera cannot be displayed
as a sequence.
If the number of sequences saved on the memory card in the camera exceeds 1,000, the
images captured thereafter cannot be displayed as sequences. To continue capturing
images in sequences, either delete sequences that you do not need to keep, or replace
the memory card. However, even if you delete sequences, images that were not included
in a sequence when they were captured cannot be displayed as a sequence.
C
Playback Menu Options Available When Using Sequence
When images in a sequence are displayed in full-frame playback mode, press the
d button to select functions in playback menu (A118).
If you press the d button when a key picture is displayed, the following settings can be
applied to all images in the sequence:
- Mark for upload, Protect
Playback Features
Viewing and Deleting Images Captured Continuously (Sequence)
Downloaded from
ManualsNet.com
82
search engine
0 0 0 4 . J P G
0 0 0 4 . J P G
1 5 / 1 1 / 2 0 1 8 1 5 : 3 0
1 5 / 1 1 / 2 0 1 8 1 5 : 3 0
Back
Back
4 / 8
4 / 8
Advertisement
Table of Contents
