Operating Procedures; Activating Functions - B&G electronics PW-100 Installation And Operation Manual

PW-100 PW-100
V5.1 V5.1

OPERATING PROCEDURES

All of the equipment's functions are managed through a six button keyboard (see fi gure
below). Press the buttons with your fi ngertips, do not use objects to press them.
Manual WAIL

ACTIVATING FUNCTIONS

Intercom*
INTER enables the hearing exterior sounds
through the internal speaker.
If during 5 minutes the equipment does
not detect any activity, INTER function
turns off (Automatic Shut Down, ASD).
Public Address "PA"*
PTT allows the driver to communicate
to the exterior through the keypad
microphone.
For a more private communication (lower
exterior volume: PTT/INTER), press PTT
while in INTER mode. For a more public
communication (louder exterior volume:
PTT/PA), press PTT while in SIREN, AUX
SIREN or stand-by (with INTER off) mode.
Both volumes are set following the same
keypad procedure.
Siren - WAIL tone
Activates the reproduction of the WAIL
siren tone.
* If acoustic feedback occurs while INTER or PTT are on, AFC (Automatic Feedback Control) will trigger to prevent
feedback. AFC is further explained ahead in this manual.
Volume UP
HORN
Volume DOWN
ON: press & release
OFF: press
release
ON: press & hold
OFF: release
ON: press & hold
OFF: release
SIREN
MIC
AUX
Siren - SIREN tone
&
Activates the reproduction of the tone
selected for SIREN.
Auxiliary
AUX function either turns on an auxiliary
siren tone "AUX SIREN" or activates an
auxiliary load "AUX LOAD", depending on
the subfunction assigned to it.
Siren - HORN tone
Activates the reproduction of the HORN
tone.
INTER
PTT
ON: press & release
OFF: press & release
ON: press & release
OFF: press & release
ON: press & hold
OFF: release
5 5