Download Print this page

Operating Procedures; Activating Functions - B&G electronics PW-100 Installation And Operation Manual

Hide thumbs Also See for PW-100:

Advertisement

Red
Black
PW-100
V5

OPERATING PROCEDURES

All of the equipment's functions are managed through a six button keyboard (see figure
below). Press the buttons with your fingertips, do not use objects to press them.
Volume UP
Manual WAIL
HORN
Volume DOWN

ACTIVATING FUNCTIONS

Intercom*
ON: press & release
OFF:
press
release
INTER enables the hearing of exterior
sounds through the internal speaker.
If during 5 minutes the equipment does
not detect any activity, INTER function
turns off (Automatic Shut Down, ASD).
Public Address "PA"*
ON: press & hold
OFF: release
PTT allows the driver to communicate
to the exterior through the keypad
microphone.
For a more private communication (lower
exterior volume), press PTT while in INTER
mode. For a more public communication
(louder exterior volume), press PTT while
in SIREN, AUX SIREN or stand-by (with no
other active function) mode.
Both volumes are set following the same
keypad procedure.
Siren - WAIL tone
ON: press & hold
OFF: release
Activates the reproduction of the WAIL
siren tone.
*
If acoustic feedback occurs while INTER or PTT are on, AFC (Automatic Feedback Control) will trigger to prevent
feedback. AFC is further explained ahead in this manual.
SIREN
INTER
PTT
MIC
AUX
Siren - SIREN tone
ON: press & release
&
OFF: press & release
Activates the reproduction of the tone
selected for SIREN.
Auxiliary
ON: press & release
OFF: press & release
AUX function either turns on an auxiliary
siren tone "AUX SIREN" or activates an
auxiliary load "AUX LOAD", depending on
the subfunction assigned to it.
Siren - HORN tone
ON: press & hold
OFF: release
Activates the reproduction of the HORN
tone.
5

Advertisement

loading