Advertisement
Available languages
Available languages
PW-100
PW-100
V5.1
V5.1
AUTOMATIC FEEDBACK CONTROL (AFC)
If acoustic feedback would occur while PTT or INTER are on (caused, for instance, by the
opening of a door or window), the equipment will detect and automatically fi x the issue by
decreasing the volume. After the event takes place, the equipment will attempt to rise the
volume back to the level defi ned by the user, as long as AFC is not triggered again.
ENERGY SAVING FEATURES (Automatic Shut Down, ASD)
Partial Shut Down (PSD)
The equipment constantly tracks the incoming voltage status. If the incoming voltage
is below 13Vdc, after 20 seconds of inactivity the equipment activates PSD mode. This
change is indicated by the turning off the keyboard's backlights. While on PSD mode, upon
pressing any key the respective function will execute normally and the equipment will
return to normal energy consumption mode.
Total Shut Down (TSD)
If the incoming voltage is below 11 Vdc, after 60 seconds the equipment will automatically
shut down any function and auxiliary load. While on TSD, upon pressing any key the
backlights will blink 3 times and the function controlled by the pressed key will not execute.
Once the equipment detects that the incoming voltage exceeds 13VDC again, the
equipment will return to its normal operation.
DIMENSIONS
INPUT VOLTAGE
INPUT CURRENT
STAND BY CURRENT <25 mA
AUDIO FREQUENCY
OUTPUT POWER
SIREN FREQUENCY
LOW VOLTAGE
SHUTDOWN
MAX. LOAD
B&G Electronics guarantees that this product leaves the factory free from defects related to materials
and manufacturing. If for any reason a failure related to materials and manufacturing were to occur
during the period of one year after the date of purchase, B&G Electronics would repair or replace the
failing equipment free of charge.
This warranty shall be voided if the product is modifi ed, tampered with, misused, or subjected to
abnormal working conditions. This warranty does not cover physical damage to the product surface.
This warranty does not apply when the malfunction results from the use of this product in conjunction
with accessories, other products, or peripheral equipment not designed by B&G Electronics.
TECHNICAL SPECIFICATIONS
Electronic Unit
Loudspeaker
Digital Keyboard
Internal Speaker
11.5 - 14.8 Vdc
6.8 Amps @ 13.6 Vdc (100W Loudspeaker)
330Hz - 5600 kHz
93W RMS - 8 Ohm
440 - 1750 Hz
If voltage drops below 11 V for 60 seconds or longer, the equipment will
cease to work and resume operation when system voltage exceeds 13V
10 A
B&G ELECTRONICS
ONE YEAR LIMITED WARRANTY
37 x 109 x 198 mm
133 x 204 x 155 mm
25 x 7 x 5.4 mm
80 x 56 x 95 mm
1.5'' x 4.3'' x 7.8''
5.2'' x 8.0'' x 6.1''
1.0'' x 0.3'' x 2.1''
3.2'' x 2.2'' x 3.7''
8
8
Advertisement
