Rear Panel Connections And Controls - Arcam SA30 Handbook

Rear Panel Connections and Controls

POWER INLET
VOLTAGE SELECT
Connect the correct mains cable
Ensure that the voltage selected
here matches the local power supply
WiFi ANTENNA
POWER INLET
SUPPLY
VOLTAGE
SWITCH POSITIONS
110-120V/220-240V ~ 50/60Hz 115 = 110 - 120V ~
500W MAX
230 = 220 - 240V ~
NETWORK
This connection allows for remote
Connect this socket to a port on
control from a third-party home
your network router using an
automation system or computer.
Ethernet patch cable. See "Home
See "Home Automation Control" on
Automation Control" on page EN-14
USB Type A
This USB socket is used playback of
audio files from pen drives.
Please read the sections "Placing The Unit", "Power" and
"Interconnect Cables" on page EN-6 before connecting
your SA30 amplifier!
ARC/eARC
Connect ARC/eARC enabled TV
input here. See "ARC/eARC input" on
page EN-13
NET
ARC / eARC
USB
5V 100mA
RS232
RS232
page EN-14
DIGITAL AUDIO INPUTS
WiFi ANTENNA Optical and coaxial digital audio
Install WiFi antenna here if wireless connectors. See "Digital Audio
network connection is required
DIGITAL IN
SAT GAME
WiFi ANTENNA
SERVICE
L
R
PRE
CD PVR STB PHONO PHONO
OUT
(MM) (MC)
ANALOGUE IN
ANALOGUE AUDIO INPUTS
PRE-AMPLIFIER OUTPUT
Phono and line level audio inputs.
Provides the pre-amplifier output
See "Analogue Audio Inputs" on
for use in a bi-amplified system. See
page EN-12 and "Phono Input" on
"Pre-Amplifier Output" on page EN-13
page EN-12
EN-9
SPEAKER TERMINALS
See "Connecting Loudspeakers" on
Inputs" on page EN-12 page EN-10
R L
AV
BD
4-16 OHMS
PHONO GROUND CONNECTION
Connect the turntable earth lead, if
required
Note that this terminal must
not be used as a safety
earth
EN