Cleaning And Care - Klarstein ALBARON Manual

EN
22

CLEANING AND CARE

1. Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator
frequently. When cleaning, unplug the unit and remove the ice cubes. Use
a diluted solution of water and vinegar to clean the inside and the outside
surface of the ice maker. Do not spray Ice maker with chemicals or diluted
agents such as acids, gasoline or oil. Rinse thoroughly before starting.
2. Keep ventilation openings in the appliance enclosure, or in the built-in
structure, clear of obstruction. Do not use mechanical devices or other means
to accelerate the defrosting process, other than those recommended by the
manufacturer.
3. Reuse the machine after being idled for a period of time, it may not have
enough water to pump for air retard, in this case, the water shortage indicator
"ADD WATER" will light up, repress POWER button to restart the ice maker is
okay.
4. To ensure the cleanness of ice, please change water for water reservoir at
least once one day. If do not use for a long time, please drain the water out
and clean it up.
5. If the compressor takes a strike action for shortage water, fully water or
interruption of power supply, it will delay for 3 minutes to start up after
restarted.
6. Always use fresh water before starting ice production either at initial
installation or after a long shut-off period.