Wireless Lan Connection Troubleshooting; Wireless Lan Connection Between The Projector And A Computer - Casio XJ-M145 Function Manual

Wireless LAN Connection Troubleshooting

Check the following points whenever you are having problems with a wireless LAN connection.
Wireless LAN Connection between the Projector and a
Computer
Problem
[Reconnect] remains on
the Wireless Connection
3 window and the
computer won't connect
to the projector.
The wireless LAN
connection between the
projector and computer
keeps dropping.
Problem
I can establish a wireless
LAN connection between
the projector and
computer, but the
computer screen
contents won't project
from the projector.
Projection image
switching is slow.
The user name does not
appear when I start
projecting from a
computer.
How can I check the
projector's SSID and
login code?
B
If any other wireless LAN utility besides Wireless Connection 3 is running on the
computer, close it.
If the projector and computer are far away from each other or if there is a wall or
some other physical impediment between them, move them closer and/or remove
the impediment.
If a nearby microwave oven, Bluetooth device, or other device is interfering with the
wireless LAN signal, relocate the interfering device.
If the projector is off, turn it on.
If the projector does not have its wireless adapter connected, connect it (page 11).
If the computer's wireless LAN function is disabled, enable it.
Check to make sure that the computer's wireless LAN function (built-in or external
wireless adapter) satisfies the required "Wireless LAN" conditions under "Minimum
System Requirements" (page 9). Connection will not be possible if these conditions
are not satisfied.
If any other wireless LAN utility besides Wireless Connection 3 is running on the
computer, close it.
If the projector and computer are far away from each other or if there is a wall or
some other physical impediment between them, move them closer and/or remove
the impediment.
If a nearby microwave oven, Bluetooth device, or other device is interfering with the
wireless LAN signal, relocate the interfering device.
Cause and Required Action
On the projector, press the [INPUT] key and make sure
that "USB" is selected as the input source.
If computer display contents won't project while
"USB" is selected as the input source, click the
button on the computer's Wireless Connection 3
window.
If the projection image has been frozen or cut off by
pressing the [FREEZE] or [BLANK] key on the
projector, press the [ESC] key to cancel the freeze/
blank operation.
Check what is selected for the projector's "Projection
Setting" item. If "High-resolution" is selected, change
the setting to "High-speed".
If your computer is running Windows Vista or
Windows 7, disable Windows Aero
Make sure that "On" is selected for the "Show User
Name Display" item on the System Admin page
"Setup" screen.
Check the Wireless standby screen.
Cause and Required Action
TM
.
43
Refer to:
"To perform wireless
projection" (page 13)
"Starting and Stopping
Projection from a Computer
Connected via Wireless
LAN Connection" (page 26)
User's Guide
(UsersGuide_English.pdf)
"To select display speed
priority or resolution priority
for projection" (page 28)
"To configure projector's
network settings and
wireless LAN connection
settings" (page 35)
"To perform wireless
projection" (page 13)