Wireless Lan Connection Troubleshooting; Wireless Lan Connection Between The Projector And A Computer - Casio MA1003-B Function Manual

Wireless LAN Connection Troubleshooting

Check the following points whenever you are having problems with a wireless LAN connection.
Wireless LAN Connection between the Projector and a
Computer
Problem
[Reconnect] remains on
the Wireless Connection
3 window and the
computer won't connect
to the projector.
The wireless LAN
connection between the
projector and computer
keeps dropping.
Problem
I can establish a wireless
LAN connection between
the projector and
computer, but the
computer screen
contents won't project
from the projector.
Projection image
switching is slow.
The user name does not
appear when I start
projecting from a
computer.
How can I check the
projector's SSID and
login code?
 If any other wireless LAN utility besides Wireless Connection 3 is running on the
computer, close it.
 If the projector and computer are far away from each other or if there is a wall or
some other physical impediment between them, move them closer and/or remove
the impediment.
 If a nearby microwave oven, Bluetooth device, or other device is interfering with the
wireless LAN signal, relocate the interfering device.
 If the projector is off, turn it on.
 If the projector does not have its wireless adapter installed, install it (page 40).
 If the computer's wireless LAN function is disabled, enable it.
 If any other wireless LAN utility besides Wireless Connection 3 is running on the
computer, close it.
 If the projector and computer are far away from each other or if there is a wall or
some other physical impediment between them, move them closer and/or remove
the impediment.
 If a nearby microwave oven, Bluetooth device, or other device is interfering with the
wireless LAN signal, relocate the interfering device.
Cause and Required Action
 On the projector, press the [INPUT] key and make sure
that "Wireless" is selected as the input source.
 If computer display contents won't project while
"Wireless" is selected as the input source, click the
button on the computer's Wireless Connection 3
window.
 If the projection image has been frozen or cut off by
pressing the [FREEZE] or [BLANK] key on the
projector, press the [ESC] key to cancel the freeze/
blank operation.
 Check what is selected for the projector's "Projection
Setting" item. If "High-resolution" is selected, change
the setting to "High-speed".
 If your computer is running Windows Vista or
Windows 7, disable Windows Aero
 Make sure that "On" is selected for the "Show User
Name Display" item of the Wireless setup.
 Check the Wireless standby screen.
Cause and Required Action
TM
.
42
Refer to:
"To perform wireless
projection" (page 11)
"Starting and Stopping
Projection from a Computer
Connected via Wireless
LAN Connection" (page 26)
User's Guide
(UsersGuide_English.pdf)
"To select display speed
priority or resolution priority
for projection" (page 28)
"To switch between Default
SSIDs" (page 30)
"To perform wireless
projection" (page 11)