Casio XJ-M145 Function Manual page 16

4.
On the computer, start up Wireless Connection 3.
If your computer is running Windows Vista or Windows 7, starting up Wireless Connection 3
will cause the "User Account Control" message to appear. When it does, click [Allow].
The Wireless Connection 3 window will appear with the message "Connecting".
If your computer is running Windows Vista or Windows 7 and the "Set Network Location"
dialog box appears, click [Cancel] to close the dialog box.
A dialog box like the one shown below will appear as soon as Wireless Connection 3 finds a
projector to connect to.
5.
Enter the user name and login code.
The user name you enter here will be displayed as the user name on the projection screen.
You can enter any name up to 20 characters long.
For the login code, enter the four-digit number displayed on the Wireless standby screen.
6.
When everything is the way you want, click [OK].
This establishes a wireless LAN connection between the projector and computer, and causes
the computer screen contents to be projected from the projector.
The following shows the Wireless Connection 3 window that appears on the computer screen.
This window is not shown on the image being projected by the projector.
If you want to configure security settings now, refer to "Configuring Security Settings for a
Wireless LAN Connection" (page 18).
For information about the Wireless Connection 3 procedure to simultaneously project images
from multiple computers and to perform other operations, see "Wireless LAN Connection
Operations" (page 25).
16