Zodiac ZS500 Instruction Manual page 5

Use the following table to configure the appliance, depending on its model.
Enter the menu by pressing the
Select the "Parameters" menu and access
level 2:
• Enter code "-19" to enter the menu?
• Set parameter P80 to 10 (to increase
the ventilator operating speed).
Please state during communications with third parties (by post, e-mail or telephone) that the original appliance
has been modified to the "equipment room" version.
4
ZS500
key:
Z550 iQ
Press and hold for 3 seconds to access the advanced
settings.
• Select "CODE" using the
• Press to confirm.
• Enter " -19" using
• Select the "P60" parameter using the
arrows.
• Press to confirm.
• The "OFF" message is displayed without flashing.
• Press or : the "OFF" message flashes.
• Press or : the "ON" message flashes.
• Press to confirm.
and arrows.
and arrows.
and