Table of Contents
Advertisement
Indoor unit
Remote controller(optional)
You can control the air-conditioner with the wired or wireless remote controller.
The controller is used for controlling power ON/OFF, setting mode, temperature, fan speed and other functions.
There are different types of remote controllers that can be used.
Operation instructions will be further specified in remote controller's manual.
Please read it carefully before using this appliance and keep it for future reference.
Wired controller
确 定
Display Panel
5
6
7
1 Run indicator (Red)
It lights on during operation. It lights off during SLEEP mode.
2 Off and On switch
The filter clean indicator is reset when the switch is pressed. The unit will be started or stopped when the
switch is pressed. The unit will be operated in forced cooling mode if press the switch continuously for more
than 5s when the unit is off.
3 Timer indicator (Green)
It lights on when timer is in use. It lights off when timer completes.
4 Filter cleaning (Yellow)
It lights on when the filter should be cleaned.
5 Defrost indicator (Green)
It lights on during defrosting and it lights off when defrosting is complete.
6 Buzzer
It chimes when the signal from remote controller is received.
7 Infrared receiver
Receives signal from the remote controller.
Note:
The figures in this manual are based on the external view of a standard model. Consequently, the design may
differ for the air conditioner model you have selected.
For multi-split type, the unit will not be started when emergency switch is pressed.
4
3
2
1
Composition of the Air Conditioner
Wireless remote controller
6
2
1
5
4
3
7
3
Advertisement
Table of Contents
