Table of Contents
Advertisement
7) Select [LPR] for [Protocol], input "lp" as the [Queue Name] under [LPR
Settings], and place a checkmark in the [LPR Byte Counting Enabled]
checkbox.
IMPORTANT!
The images may not be printed properly if [LPR Byte Counting Enabled] is not se-
lected.
This installation procedure assumes that the RISO printer is connected to
the network using the dedicated network interface card,RISORINC-NET (op-
tion). When connecting to a commercial print server etc. on the network,
refer to the instruction manual provided by the manufacturer. After the LPR
function is added, your computer requires restarting. Therefore, be sure to
store the necessary data in your computer before carrying out the operation.
Follow the instruction manual of Windows 2000/Windows XP/Windows Vista/
Windows 7/Windows 8/Windows 8.1 or Help for details.
Connection via Other Cables
Installing the Printer Driver
31
Advertisement
Table of Contents
