Riso MZ9 Series Installation Manual page 23

Connection via USB Cable
Click [Finish].
Be sure to restart the computer before using the Printer Driver. If you have
checked [Restart immediately], the computer will be shut down and restarted
when you click [Finish].
Open the print folder.
Open the "Apps" screen and click [Control Panel]-[Hardware and Sound]-[De-
vices and Printers].
Open the properties of the printer to which the Printer Driver has
been installed.
Right-click on the icon of the printer, and select [Printer Properties] in the
displayed menu.
Click [Print Test Page].
When a message appears, wait for a few seconds and click [Close].
Then remove the [RISO Printer Driver] CD-ROM from the CD-ROM
drive of your computer.
IMPORTANT!
Keep the removed CD-ROM at hand.
Printer driver installation is now completed.
21
Installing the Printer Driver