Casio XJ-460 User Manual page 43

Using the Setup Menu
Setting Explanations
Auto:
Other settings: Each setting selects the applicable video system. Use these settings
Setting Storage
This setting is saved for the VIDEO and S-VIDEO input terminal only.
IInput Settings
This sub-menu lets you select the input source for the image that appears in the P-in-P sub-
window (page 15).
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
VIDEO: Select VIDEO as the input source of the sub-window.
S-VIDEO: Select S-VIDEO as the input source of the sub-window.
Setting Storage
This setting is saved for the RGB input terminal only.
Select this setting to have the projector switch the video signal system
automatically in accordance with the input signal from the video device
that is connected to the VIDEO or S-VIDEO input terminal. This is the
setting you should normally use.
when you want to specify only one specific video signal for the VIDEO
and S-VIDEO input terminal.
P-in-P Input
Available Items (Parentheses indicate defaults.)
(VIDEO), S-VIDEO
None
(VIDEO), S-VIDEO
* Only when the currently selected input source is RGB.
43