Option Settings1 - Casio XJ-460 User Manual

Using the Setup Menu
IInput Settings
This sub-menu returns all of the sub-menu items on the Input Settings main menu to their
initial default settings.
You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
Basically, initialization initializes the settings of the current input source. Note, however, that
the signal name indicator setting is always initialized, regardless of the currently selected
input source.
For details about the initialization procedure, see "To initialize the settings of a particular
main menu item" on page 29.

Option Settings1

IOption Settings1
This sub-menu lets you specify whether auto detect of the input source should be performed
whenever the projector is turned on (page 5).
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
On: Turns on auto detection of the input source whenever the projector is turned on.
Off: Turns off auto detection of the input source whenever the projector is turned on.
Setting Storage
A single setting is stored, which is applied to all input sources.
Restore Menu Defaults
Auto Input Detect
Available Items (Parentheses indicate defaults.)
(On), Off
45