Option Settings2 - Casio XJ-460 User Manual

Using the Setup Menu
IOption Settings1
This sub-menu returns all of the sub-menu items on the Option Settings1 main menu to their
initial default settings.
You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
The Auto Adjust item is initialized only when RGB is selected as the input source. All
other items are always initialized, regardless of the currently selected input source.
For details about the initialization procedure, see "To initialize the settings of a particular
main menu item" on page 29.

Option Settings2

IOption Settings2
This sub-menu item specifies the [AF/AK] key function.
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
AF/AK:
Continuous AF/AK: Assigns the Continuous AF/AK Mode to the [AF/AK] key. Pressing
AF:
Setting Storage
A single setting is stored, which is applied to all input sources.
For details about [AF/AK] key operation and the various modes that can be assigned to
it (AF/AK Mode, Continuous AF/AK Mode, AF Mode), see "Auto Focus and Auto
Keystone Correction (AF/AK)" (page 9).
Restore Menu Defaults
AF/AK Mode
Available Items (Parentheses indicate defaults.)
(AF/AK), Continuous AF/AK, AF
Assigns the AF/AK Mode to the [AF/AK] key. Pressing the [AF/AK]
key while this setting is selected performs Auto Focus and auto
keystone correction.
the [AF/AK] key while this setting is selected displays an alignment
chart and performs a continuous Auto Focus operation. Pressing the
[AF/AK] key again performs auto keystone correction.
Assigns the AF Mode to the [AF/AK] key. Pressing the [AF/AK] key
while this setting is selected performs Auto Focus only.
59