3.2.2. Right Side
The right half of the lower toolbar is home to a number of other utilitarian functions.
From left to right, these are:
3.2.2.1. Oversampling Quality (Studio/Render)
You can save CPU resources, especially in a large DAW project running a lot of virtual
instruments and effects and your computer is struggling to handle it all.
The Render setting is the default setting. If you want to save computer resources, select
Studio. There will be a minimal sacrifice in audio quality, but you will be able to carry on
working.
♪ If you switch to Studio mode, remember to set this switch back to Render when you're rendering
individual tracks, stems, or the final mix of the project.
3.2.3. Bypass
This button bypasses the plug-in.
Arturia - User Manual Dist OPAMP-21 - The User Interface
Lower toolbar, right side
Oversampling Quality options
14