Page 1
Clamp-on Keyboard Tray with Pencil Drawer Instruction Manual SKU: MOUNT-KB05-4D Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-kb05-4d GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
Page 2
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Page 3
STEP 2 Assemble the slider brackets with clamps to Keyboard Tray (A) using M5x12mm Screws (S-B), and tighten with a Phillips screwdriver. The clamps must be on the opposite end from the center cable guide. Right Left STEP 3 Slide Pencil Drawer (B) back into the open ends of Drawer Sliders (F) until they are latched together. STEP 4 Mount assembled Pencil Drawer (B) to the underside of Keyboard Tray (A) using ST5x12mm Screws (S-C) with a Phillips screwdriver.
Page 4
AVG. RESPONSE TIME (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-KB05-4D and is the answer not in the manual?
Questions and answers