Advertisement
Quick Links
Black Office Chair Mounted Keyboard Tray
Instruction Manual
SKU: MOUNT-KB08C
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-kb08c
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vivo MOUNT-KB08C
Summary of Contents for Vivo MOUNT-KB08C
- Page 1 Black Office Chair Mounted Keyboard Tray Instruction Manual SKU: MOUNT-KB08C Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-kb08c GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 Mount Angled Support (D) to the larger diameter tube on the chair’s gas spring using Clamping Plate (F), M6x25mm Screws (S-B), and 4mm Allen Wrench (T-B). NOTE: This mount can fit pole diameters between 1.7” - 2” (44mm-51mm) - Page 4 STEP 2 Attach Vertical Support (E) to Angled Support (D) using M6x8mm Screws (S-C) and 4mm Allen Wrench (T-B).
- Page 5 STEP 3 Attach Arm (B) to Keyboard Tray Set (A) using M5x12mm Screws (S-A) and the Phillips end of 5mm Allen Wrench (T-A). Attach Keyboard Stop (G) to one of the Keyboard Tray Set (A) panels using M5x12mm Screws (S-A) and the Phillips end of 5mm Allen Wrench (T-A).
- Page 6 STEP 4 Slide the arm assembly onto Vertical Support (E).
- Page 7 STEP 5 Remove the adhesive backing from Wrist Rest (C) and place on the tray assembly. Tighten Arm (B) using 5mm Allen Wrench (T-A).
- Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the MOUNT-KB08C and is the answer not in the manual?
Questions and answers