Advertisement
AFTER USE
Before detaching parts, make sure the motor has stopped completely, then disconnect the Plug
from the outlet. (DISASSEMBLY: refer to page 5)
CLEANING
All parts must be cleaned immediately after use. Left-over food particles may cause unpleasant odours,
stains or malfunction of the appliance.
JUICER
1 Wash both sides of the spinner filter mesh with a
sponge under running water. Use brush if necessary.
2 Wash each part in cold or lukewarm water with a
soft sponge. Rinse and dry thoroughly before storing.
Note:
• Do not use benzene, thinner, alcohol, bleach, polishing powder or metal brush; otherwise the surface
will be damaged.
• Do not put in the dishwasher.
• Some discolouration of the Spinner, the Container Cover, or the interior of the Container Unit may
occur upon usage.
• Handle the Spinner and the Spout, carefully during cleaning. This may cause injury.
* Brush and long handled sponges are not provided.
BLENDER
1 Remove the Gasket. Wash the Tumbler under
running water and clean by using a long handled
sponge. It is recommended to wash the groove of
the Tumbler by using a brush.
2 Wash Tumbler, Gasket, and Tumbler Lid using soapy
water. Rinse and wipe dry.
3 Clean the Cutting Blade with a brush under
running water.
After cleaning
• Reassemble the Gasket and the Blender Container
Base to the Tumbler to avoid the Cutting Blade from
being exposed.
Note:
• Check Safety Lever whether it can move freely before placing on the Tumbler. Make sure there is no
foreign object or ingredient inside the Safety Lever after cleaning in order to ensure the Safety Lever
moves freely.
• Unplug before cleaning. Handle the Cutting Blade carefully during cleaning.
• Do not put in dishwasher.
• Some discolouration of the Tumbler or the interior of the Tumbler Unit may occur upon usage.
• Do not use steel wool, hand brush, nylon sponge, etc. to wash plastic parts.
(Scratch marks may appear on surface)
*Brush and long handled sponges are not provided.
1
1
3
Safety Lever
moves freely
2
2
9
Advertisement
