Advertisement
CIRCUIT BREAKER PROTECTION
When the Circuit Breaker automatically stops the motor due to overloading, follow the directions
below. Do not continuously reset for many times.
Switch OFF the appliance.
FOR JUICER
1. Remove the accumulated food residue from the Spinner and the Container Cover. Then cut the
ingredients into smaller pieces.
2. Attach parts again and resume operation. Push them gently into Feeding Tube using the Food Pusher.
FOR BLENDER
1. Reduce the ingredients to less than half of the total capacity and resume operation.
2. If it still does not start, switch OFF the Switch to "O" position again, then resume.
SAFETY LOCK
The safety lock has been designed to prevent the Juicer and the Blender from switching ON when
the Container Unit or the Tumbler Unit is not properly in place.
Juicer
Blender
Juicer Pin
Blender Pin
Note:
Do not push any of the Safety Pins and Safety Lever with any instrument, stick etc.
Do not pour liquids or ingredients at the Safety Pin and Switch area.
Keep the Safety Pin area clean to avoid foreign particles accumulate on the area.
The above actions will ensure the Safety Lock movement to function smoothly otherwise it will damage
the parts related to Safety Lock.
6
Container Pin
Safety Lever
Advertisement
