Advertisement
Quick Links
INSTRUCTION MANUAL
D1xL1 & D1xL2
Loudspeaker
Class I, Zone 1, 2, 21 & 22
1)
Product Table
Unit Type Code
D1xL1FV100-A
D1xL1FV070-A
D1xL1FR008-A
D1xL1FR016-A
D1xL2FV100-A
D1xL2FV070-A
D1xL2FR008-A
D1xL2FR016-A
D1xL2HV100-A
D1xL2HV070-A
D1xL2HR008-A
D1xL2HR016-A
Frequency Range: 400Hz to 8000Hz
The table shows the input current taken by the various Loudspeakers.
Nominal current at nominal voltage.
Table 1: Electrical Ratings.
2)
Warnings
CAUTION
TO REDUCE THE RISK OF IGNITION OF HAZARDOUS
ATMOSPHERES:
DISCONNECT FROM SUPPLY BEFORE OPENING.
KEEP TIGHTLY CLOSED WHEN IN OPERATION.
WARNING
FIT SEALING FITTING IN CONDUIT RUNS WITHIN 18 INCHES
FROM ENCLOSURE.
EQUIPMENT MUST NOT BE INSTALLED WITH THE HORN FACING
UPWARDS OF HORIZONTAL
DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS
PRESENT
DO NOT OPEN WHEN ENERGISED
POTENTIAL ELECTROSTATIC CHARGING HAZARD - CLEAN
ONLY WITH A DAMP CLOTH
ENCLOSURE ENTRIES: TWIN M20 X 1.5 / SINGLE 1/2" NPT
ATEX/IECEx & UKEx INSTALLATIONS:
EXCEEDS 70°C AT ENTRY OR 80°C AT BRANCHING POINT USE
SUITABLE RATED CABLE AND GLANDS
European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH
Document No. D190-00-201-IS
D1xL1F
D1xL2F
Input
100V Line
70V Line
8 Ohm
16 Ohm
100V Line
70V Line
8 Ohm
16 Ohm
100V Line
70V Line
8 Ohm
16 Ohm
IF TEMPERATURE
Issue 1
Power (Watts)
Max I/P Volts
15
15
15
15
25
25
25
25
25
25
25
25
ATTENTION
POUR
REDUIRE
ATMOSPHÈRES DANGEREUSES :
COUPER L 'ALIMENTATION AVANT OUVERTURE.
CONSERVER FERMÉ PENDANT LE FONCIONNEMENT.
AVERTISSEMENT
CONDUITS DOIVENT ETRE SCELLES EN MOINS DE 18 POUCES.
ÉQUIPEMENT NE DOIT PAS ETRE INSTALLE AVEC LE KLAXON
TOURNEE VERS LE HAUT DE HORIZONTAL.
NE PAS OUVRIR UN PRESENCE D'ATMOSPHERE EXPLOSIVE
NE PAS OUVRIR ENERGIE
DANGER POTENTIEL CHARGE ÉLECTROSTATIQUE - NETTOYER
UNIQUEMENT AVEC UN CHIFFON HUMIDE
ENTRÉES DE BOÎTIER: 2 x M20 X 1.5 / 1 x 1/2" NPT
ATEX/IECEx & UKEx INSTALLATIONS : SI LA TEMPÉRATURE
DÉPASSE 70 °C À L'ENTRÉE OU 80 °C AU POINT DE
BRANCHEMENT,
D'ÉTANCHÉITÉ APPROPRIÉS
16-03-2022
D1xL2H
Sound
Pressure Level
dB(A)
Pink
Max
Noise
Rated
@ 1W
100
70
113
10.95
15.49
100
70
118
14.14
20
100
70
121
14.14
20
LE
RISQUE
D'INFLAMMATION
UTILISER
UN
CÂBLE
www.e2s.com
106
108
111
DES
ET
DES
JOINTS
Tel: +44 (0)208 743 8880
Sheet 1 of 6
Advertisement
Related Manuals for E2S D1xL1FV100-A
Summary of Contents for E2S D1xL1FV100-A
- Page 1 D1xL2H Product Table Sound Pressure Level dB(A) Unit Type Code Input Power (Watts) Max I/P Volts Pink Noise Rated @ 1W D1xL1FV100-A 100V Line D1xL1FV070-A 70V Line D1xL1FR008-A 8 Ohm 10.95 D1xL1FR016-A 16 Ohm 15.49 D1xL2FV100-A 100V Line D1xL2FV070-A 70V Line...
- Page 2 Ex tb IIIC T91°C Db -55°C to +75°C Installation must be carried out in compliance with the National Electric Code / Canadian Electric Code European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-201-IS Issue 1...
- Page 3 Only the explosionproof cover is to be used for access to the enclosure for installation, service and maintenance. European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-201-IS Issue 1...
- Page 4 Replace the explosionproof cover of the loudspeaker, taking care not to damage the explosionproof threads. Tighten fully. European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-201-IS Issue 1...
- Page 5 Refer to Wiring Schematic D190-06-201 Configs. 1a -2c for Line in Loudspeakers and Config. 3 for Low impedance wiring details. European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-201-IS...
- Page 6 DC Line Monitoring Link Fig. 5 Low Impedance Line Monitoring Link European Safety Systems Ltd. Impress House, Mansell Road, Acton, London W3 7QH www.e2s.com Tel: +44 (0)208 743 8880 Document No. D190-00-201-IS Issue 1 16-03-2022 Sheet 6 of 6...
-
Page 10: Eu Declaration Of Conformity
Denmark EU‐type Examination Certificate (Module B): DEMKO 19 ATEX 2141X Notified Body for Quality Assurance Notification / Conformity to EU‐type Sira Certification Service based on Notified Body No.: 2813 quality assurance of the production process (Module D): Unit 6, Hawarden Industrial Park, Hawarden, Deeside, CH5 3US, UK Quality Assurance Notification (Module D): SIRA 05 ATEX M342 Provisions fulfilled by the equipment: II 2G Ex db IIC T6…T3 GB II 2D Ex tb IIIC T82 ̊ C …145 ̊ C Db Standards applied: EN 60079‐0:2018 EN 60079‐1:2014 EN60079‐31:2014 Directive 2014/30/EU: Electromagnetic Compatibility Directive (EMC) Standards applied: EN 61000‐6‐1:2007 EN 61000‐6‐2:2005 EN 61000‐6‐3:2007 / A1:2011 / AC: 2012 EN 61000‐6‐4:2007 / A1: 2011 Directive 2014/35/EU: Low Voltage Directive (LVD) Standards applied: EN 60947‐1:2007 + A2:2014 Directive 2011/65/EU: Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) The product and all the components contained within it are in accordance with the restriction of the use of hazardous substances in electrical and electronic equipment, including amendment by Directive 2015/863/EU. Regulation (EC) 1907/2006: Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) The product and all the components contained within it are free from substances of very high concern. Other Standards and Regulations EN 60529:1992+A2:2013 ‐ Degrees of protection provided by enclosures (IP code) – enclosure rated IP66 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC‐067_Issue_H (D1x).docx ‐ Page 1 of 2 ‐ QAF_252_Issue_5... - Page 11 EU Declaration of Conformity On behalf of European Safety Systems Ltd., I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment conforms with all technical and regulatory requirements of the above listed directives, regulations and standards. This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC‐067_Issue_H Quality Assurance Manager Date and Place of Issue: London, 10/02/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC‐067_Issue_H (D1x).docx ‐ Page 2 of 2 ‐ QAF_252_Issue_5...
- Page 12 Notified Body No.: 0518 quality assurance of the production process (Module D): Rake Lane, Eccleston, Chester CH4 9JN, UK Quality Assurance Notification (Module D): CSAE 22UKQAN0046 Provisions fulfilled by the equipment: II 2G Ex db IIC T6…T3 GB II 2D Ex tb IIIC T82 ̊ C …145 ̊ C Db Standards applied: EN 60079‐0:2018 EN 60079‐1:2014 EN60079‐31:2014 Directive 2014/30/EU: Electromagnetic Compatibility Directive (EMC) Standards applied: EN 61000‐6‐1:2007 EN 61000‐6‐2:2005 EN 61000‐6‐3:2007 / A1:2011 / AC: 2012 EN 61000‐6‐4:2007 / A1: 2011 Directive 2014/35/EU: Low Voltage Directive (LVD) Standards applied: EN 60947‐1:2007 + A2:2014 Directive 2011/65/EU: Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) The product and all the components contained within it are in accordance with the restriction of the use of hazardous substances in electrical and electronic equipment, including amendment by Directive 2015/863/EU. Regulation (EC) 1907/2006: Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) The product and all the components contained within it are free from substances of very high concern. Other Standards and Regulations EN 60529:1992+A2:2013 ‐ Degrees of protection provided by enclosures (IP code) – enclosure rated IP66 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC‐097_Issue_A (D1x UKCA).docx ‐ Page 1 of 2 ‐ QAF_252_Issue_5...
- Page 13 UKCA Declaration of Conformity On behalf of European Safety Systems Ltd., I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment conforms with all technical and regulatory requirements of the above listed directives, regulations and standards. This Declaration is issued under the sole responsibility of the manufacturer. Martin Streetz Document No.: DC‐097_Issue_A Quality Assurance Manager Date and Place of Issue: London, 24/02/2022 E2S Telephone: +44 (0)20 8743 8880 Fax: +44 (0)20 8740 4200 Email: sales@e2s.com www.e2s.com DC‐097_Issue_A (D1x UKCA).docx ‐ Page 2 of 2 ‐ QAF_252_Issue_5...
- Page 14 Page left Intentionally blank...