Connecting The Electrode; Turning The Meter On; Sensor Preparation & Conditioning - Hanna Instruments HI9811-51 Instruction Manual

5.2. CONNECTING THE ELECTRODE

Align the DIN connector's 8 pins with the socket and push in the plug.

5.3. TURNING THE METER ON

Turn the instrument on by pressing the On/Off key.
5.4. SENSOR PREPARATION & CONDITIONING
1. Remove the protective cap
2. If the protective cap does not contain any liquid, pour
Storage solution into the cap.
3. Place it back on the sensor and soak for at least 30 minutes
before use.
4. Rinse with tap water prior to Calibration or Measurement.
HI70300
9