Last Number Redial List; Opening Lists With The Message Key; Using A Handset As A Room Monitor - Siemens GIGASET Gigaset S45 User Manual

Using a handset as a room monitor

Date:
Enter the day/month in 4-digit format.
Time:
Enter the hour/minute for the reminder
call in 4-digit format.
Prompt:
Select the type of signal for the
reminder and press
¤
Save changes (page 21).
Note:
Reminder calls require a time stamp. If you
select a visual signal, then a time stamp is not
required and is automatically set to 00.00.
Deleting anniversaries
¢
s s (Select entry; page 10)
Press display keys one after
§View§ §Edit§
the other.
s
Scroll to the
§Edit§ §Delete§ §Save§
Press display keys one after
the other.
Reminder call on an anniversary
A reminder call is signalled on the handset
using the selected ringtone.
Press the display key to stop
§Silence§
the reminder call.

Last number redial list

The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers
is in the directory, then the corresponding
name will be displayed.
Manual last number redial
c
Press the key briefly.
s
Select entry.
c
Press the talk key again. The
number is dialled.
When a name is displayed, you can display
the corresponding phone number by
pressing the display key
12
.
§OK§
Annivers.: line.
.
§View§
Managing entries in the last number
redial list
c
Press the key briefly.
s
Select entry.
Open the menu.
Options
The following functions can be selected
with q:
Display Number (as in the directory,
page 11)
Copy to Directory
Copy an entry to the directory
(page 10).
Delete Entry (as in the directory, page 11)
Delete List (as in the directory, page 11)
Opening lists with the message
key
An advisory tone sounds as soon as a new
entry appears on a list. The f key
flashes (it goes off when the key is
pressed). In idle status, the displays shows
an icon for the new message.
If you press the f key, you access the
lists which contain new messages.
Using a handset as a room
monitor
If the room monitor is activated, a previ-
ously stored destination number is called
as soon as a set noise level is reached. You
can store an internal or external number
in your handset as the destination
number.
The room monitor call to an external
number stops after approx. 90 seconds.
The room monitor call to an internal
number (handset) stops after approx.
3 minutes (depending on the base sta-
tion). While the room monitor is activated,
all keys are locked except the end call key.
The handset's speaker is muted.