Table of Contents
Advertisement
9.6
9.6.1
0313856_AMP ECO UK V1.0, 21-04-2022
2.
Change the alarm temperature setpoint:
a)
Use [+] to increase the setpoint.
b)
Use [-] to decrease the setpoint.
3.
Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.
Display settings
The Display Settings submenu shows the settings for the unit of temperature, the
display brightness, the backlight delay and the language.
Fig. Display settings submenu
Press on a line with a [>] to change the settings.
Set the unit of temperature
To change the unit of temperature:
1.
From the Display Settings submenu open the Unit of temperature control screen.
2.
Change the setting.
3.
Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.
57
Advertisement
Table of Contents
