Table of Contents
Advertisement
Getting started
Using the SIM card/battery
Your phone's display is delivered with a
protective film. Remove this film before
getting started. The service provider
supplies you with a SIM card on which all
the important data for your account is
stored. If the SIM card is credit card-sized,
snap out the smaller segment and trim
any rough edges.
Always switch off phone before removing
the battery!
Only 3V and 1.8V SIM cards are
supported. Please contact your service
provider if you have an older card.
Release and open battery cover
1
Remove battery
2
3
Getting started
Open SIM card holder, insert SIM card, and
close holder
4
5
Insert battery and close cover
8
Charge battery
The battery is not fully charged when
delivered. Plug charger cable into the
bottom of the phone, plug power supply
unit into a mains power socket and
charge for at least two hours. The power
supply unit heats up when used for long
periods. This is normal and not
dangerous.
When charging is in progress
displayed.
6
7
9
h
is
7
Advertisement
Table of Contents
