Windows Xp - Buffalo PL-05H Series User Manual

Chapter 4 TCP/IP Settings

Windows XP

To configure TCP/IP in Windows XP, follow the procedure below.
1
Open [Control Panel].
2
Double-click [Network].
3
Right-click on the network adapter, then click [Properties].
4
Select [Internet Protocol (TCP/IP)], then click [Properties].
5
To have DHCP set your IP address settings automatically, check [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
6
Click [Close].
PL-05H Series User Manual
192.168.11.80
255.255.255.0
192.168.11.1
192.168.11.1
blank
17