Chapter 1 Product Overview
Side
4
PLC Button
Hold down
for 1 to 3 seconds:
Hold down
for 10 seconds:
5
Reset Button
To reset all settings, hold down this button until the amber power LED flashes (about 3
seconds). Power must be on.
Back Side
6
Factory Default Settings
PL-05H Series User Manual
4
5
This starts the PLC connection process or cancels the connection process.
If the Power LED indicates that the PLC connection has failed, the Power
LED stops blinking.
This disconnects the PLC connection.
6
This sticker shows the MAC address and Device Password.
5