Table of Contents
Advertisement
7
To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and
[Obtain DNS server address automatically].
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
8
Click [OK].
Windows Vista
To configure TCP/IP in Windows Vista, follow the procedure below.
1
Open [Control Panel].
2
Click [Network and Sharing Center].
3
Click [Manage network connections] on the left side menu.
4
Right-click on the network adapter, then click [Properties].
5
If the User Account Control screen opens, click [Yes] or [Continue].
6
Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
7
To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and
[Obtain DNS server address automatically].
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
8
Click [Close].
Windows XP
To configure TCP/IP in Windows XP, follow the procedure below.
1
Open [Control Panel].
2
Double-click [Network].
3
Right-click on the network adapter, then click [Properties].
4
Select [Internet Protocol (TCP/IP)] then click [Properties].
34
Advertisement
Table of Contents
