Extender Kit Installation Procedure - Buffalo PL-05H Series User Manual

Chapter 2 Installation

Extender Kit Installation Procedure

To configure the Extender Kit, follow the procedure below.
Room 1
modem or router
Internet
TV
(with an Ethernet interface)
1
Room 3
2
Room 3
PLC button
PL-05H Series User Manual
Powerline
PLC device
(Starter kit)
computer
Bring the PLC device to the location where you want to install it and
connect it to the power outlet.
PLC device
(Extender kit)
PLC device
(Extender kit)
Room 2
Powerline
PLC device
(Starter kit)
Hold down the PLC button of the PLC device over 10
seconds when the PLC device power is turned on.
Room 3
PLC device
(Extender kit)
TV
(with an Ethernet interface)
9