Advertisement
Read this guide carefully and Keep this for your future reference.
NE3703-611
SFP+ Module (10G-SR)
User's Guide
Precautions for Use
• Read carefully "Precautions for Use" in your "NE3703-111 10GBASE
Adapter (SFP+/2ch) User's Guide", and observe the instructions to
ensure proper and safe use of this product.
This product is classified as a CLASS 1 LASER PRODUCT.
Contents List
SFP+ Module (10G-SR)
User's Guide
Serial Number Label
Warranty Card
•This warranty Card is available only for
using in Japan.
Specification
Product Name
Product Code
Data Transfer Rate
Type of Connector
Voltage/Current
Temperature(C) 0-45
Operating condition
Humidity (%)
Descriptions
Optical Connector
SFP+ Interface Connector
Lever
Dust Cover
SFP+ Module (10G-SR)
NE3703-611
10Gbps
LC-type Connector
3.3V/0.25A
RH
5-85
(no condensation)
Installation
1. Remove the Slot Cover on the NE3703-111
IMPORTANT:
Secure the cover
2. Insert this product to the SFP slot
on the NE3703-111.
IMPORTANT:
When the module is
inserted correctly,
an audible 'clicking'
sound will be heard.
3. Remove the Dust Cover from this product,
and Connect the Cable firmly.
IMPORTANT:
Secure the cover
This product is a SFP+ module of NE3703-111 exclusive use.
-
The connection with the other equipment is not supported.
IMPORTANT:
Secure the "Serial Number Label" attached this product.
-
NEC Corporation.
7-1 Shiba 5-Chome, Minato-Ku
Tokyo 108-8001, Japan
This guide is made from recycled paper
Removal
1. Disconnect the Cable
2. Flip down the Lever of the SFP+ module,
then Remove the module from the slot
toward to the arrow
flip down
pull the lever
3. Attach the slot cover to the slot on adapter.
2nd Edition
April 2013
Advertisement
