Sharp SD-PX2 Operation Manual page 65

DVD/CD player
Symptom
Even though a disc is loaded, Is the disc loaded upside down?
"NO PLAY" is displayed.
Is the disc very dirty?
Playback sounds are Does the disc satisfy the standards?
skipped.
Is the unit located near excessive vi-
brations?
Has condensation formed inside the
unit?
The control buttons do not Is the disc very dirty?
function. Music or video play-
Does the disc satisfy the standards?
back is interrupted.
Is the unit located near excessive vi-
brations?
Has condensation formed inside the
unit?
Pictures and sound are Is the disc very dirty?
skipped.
Is the unit located near excessive vi-
brations?
Has condensation formed inside the
unit?
The system does not operate Is a disc other than a DVD (region
even if the power is on. number 1 or ALL) and an audio CD
loaded?
Image cannot be played Are the video and audio cables con-
back. (Sound is not heard.) nected improperly?
Is a disc other than a DVD (region
number 1 or ALL) and an audio CD
loaded?
Is the disc very dirty?
Is the disc loaded upside down?
Clean the optical pickup if it is dirty.
Is the TV input set to "VIDEO 1/VID-
EO 2" etc.?
Is the unit turned on?
Possible cause Reference
page
P. 60
P. 60
P. 60
P. 8
P. 13, 55
P. 8
P. 58
P. 51
P. 14
Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (laser pickup, etc.) or on the trans-
mitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before operating the unit.
If trouble occurs
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
Clearing all the memory (reset)
1 Unplug the unit.
2 While holding down the ON/STAND-BY button, plug in the AC power cord.
"RESET" appears for about 1 second and the power turns off.
Caution:
When you reset, all data is deleted and the settings return to the default. (DVD initial
settings are retained.)
SD-PX2
ENGLISH
E-60