Changing The Initial Setting Of Dvd - Sharp SD-PX2 Operation Manual

Changing the initial setting of DVD

SD-PX2
ENGLISH
A new setting will be retained even if the unit is set to the stand-by mode. If you want
to restore or change the setting, reset it.
1
Press the button, set the MODE 1/
MODE 2 switch to MODE 2 and press
the DVD SET UP button.
The initial setting screen appears.
E-39
2
Press the
TER button.
For setting items, see the table on page 40.
3
Press the , ,
ENTER button.
To change other settings, begin from step 2.
4
Press the RETURN
The new setting is memorized.
DVD SETUP
TV MODE Notes:
PARENTAL
You cannot display the initial setting screen while a disc is playing.
AUDIO
The previous screen appears by pressing the RETURN
DISC LANGUAGE
an item or setting.
OSD LANGUAGE
SELECT
RETURN
ENTER ENTER
or button to select a setting item and press the EN-
or button to select a parameter and press the
Example: "TV MODE" is selected
button twice.
TV MODE 4: 3 LB
PROGRESSIVE OUT OFF
DVD-AUDIO AUDIO
TV MODE
4: 3 PS
4: 3 LB
16 : 9
TV MODE
4: 3 PS
4: 3 LB
16 : 9
button while selecting