Table of Contents
Advertisement
To change the audio language (audio out-
put)
During playback, you can change the audio language (audio output).
1
During playback, set the MODE 1/MODE 2 switch to MODE 2 and
press the AUDIO button.
2
Press the AUDIO button repeatedly to select
the audio language (audio output).
Each time you press, audio language (audio output) changes.
Example:
1: Original <English> (Dolby Digital 5.1 Surround)
1
1 5.
h c
D
2: Original <English> (DTS 5.1 Surround)
2
3: Japanese (Dolby Digital 2 ch)
3
2
h c
D
Notes:
The audio language on some DVDs may not be changed.
For available audio languages (audio outputs), see the disc jacket.
When you switch the audio language (audio output) during DVD-Audio playback,
the unit may return to the beginning of the track. In this case, it takes longer to
switch the language.
During CD playback, the audio output switches as follows: "L + R", "L", "R".
When you set the unit to the stand-by mode or replace the disc, settings return to
the default.
For MP3 discs, you cannot change the audio output.
Various settings
Brightening the image (Gamma correction)
1
During playback, set the MODE 1/
MODE 2 switch to MODE 2 and
press the GAMMA button to select
"ON".
"ON" and "OFF" will be switched with each press of this button.
1 1
1 5.
h c
D
2
Within 10 seconds, press the
button to set the level.
Level
OFF
Normal
ON
Slightly brighter
To restore the original brightness:
In step 1, select "OFF".
Sharpening the image (Super picture)
1
During playback, set the MODE 1/
MODE 2 switch to MODE 2 and
press the S.PICTURE button to se-
lect "ON".
"ON" and "OFF" will be switched with each press of this button.
2
Within 10 seconds, press the
button to set the level.
Level
OFF
Normal
ON
Slightly clearer
ON
Clearer
To restore the original image quality:
In step 1, select "OFF".
ON
G
or
ON
G
Setting
Level
ON
Brighter
ON
A lot brighter
ON
S
or
ON
S
Setting
Level
ON
A lot clearer
ON
Soft
SD-PX2
ENGLISH
Setting
Setting
E-26
Advertisement
Table of Contents
