Tv Connection - Sharp SD-PX2 Operation Manual

TV connection

SD-PX2
ENGLISH
Unplug all equipment before making any connections.
Connect a TV with the supplied video cable.
Notes:
Change the TV input in accordance with the connected jack.
Do not connect other equipment between the TV and this unit. If they are con-
nected via a VCR, pictures may be distorted.
Using the audio cable, you can listen to the TV sound with this unit.
E-13
TV
To video
input jack
Video cable (supplied)
If your TV is equipped with an S-video input jack or component video input jacks, pur-
chase an appropriate cable to enjoy higher quality images.
When you use a TV supporting progressive scan, open the initial setting screen and
set "PROGRESSIVE OUT" to "ON" in "TV MODE" (see page 41).
S-video cable
(commercially available)
Component video cable (commercially available)
Notes:
Change the TV input in accordance with the connected jack.
Do not connect other equipment between the TV and this unit. If they are con-
nected via a VCR, pictures may be distorted.
Using the audio cable, you can listen to the TV sound with this unit.
If your TV has different indications for the component video inputs (Y, CB and CR
or Y, B-Y and P-Y), connect jacks with its matching color.
Do not connect to a component video input jack designed for the high-vision sys-
tem, which is not DVD-compatible (the images may be distorted or not appear).
Use a video cable, S-video cable or component video cable to connect the unit to
a TV.
TV
To S-video
input jack
To component
video input jacks