Sharp SD-PX2 Operation Manual page 53

1
Turn on the power, set the MODE 1/MODE 2 switch to MODE 2 and
press the TIMER/SLEEP button.
2
Within 10 seconds, press the
ONCE" or "TIMER DAILY", and press the ENTER button.
Once timer
3
Within 10 seconds, press the
or "DAILY SET", and press the ENTER button.
Once timer
4
Press the or button to adjust
the hour and then press the EN-
TER button.
5
Press the or button to adjust
the minutes and then press the
ENTER button.
6
Set the time to finish as in steps
4 and 5 above.
or button to select "TIMER
Daily timer
or button to select "ONCE SET"
Daily timer
7
Switch the input with the or
button.
Available playback sources: DVD/CD, TUNER, TV, AUX and VCR.
If you select TV, AUX or VCR, connect the unit to the corresponding equip-
ment and set the timer.
When you select "TUNER", select a station by pressing the
then press the ENTER button.
If a station has not been programmed, "NO P.SET" will be displayed and timer
setting will be canceled.
Preset channel number
8
Adjust the volume with the
button and press the ENTER
button.
Do not set the volume too high.
9
Press the ON/STAND-BY button to enter the power stand-by mode.
The unit enters the timer stand-by mode.
(The timer set indicator lights up. See page 49.)
The timer setting is retained.
button, and then press the ENTER
or button, and
or
SD-PX2
ENGLISH
E-48