Download
Share
Print this page
Agora Models Mitsubishi A6MZERO FIGHTER Build Instructions
  1. Manuals
  2. Brands
  3. Agora Models Manuals
  4. Toy
  5. Hachette Mitsubishi A6MZERO FIGHTER
  6. Build instructions

Agora Models Mitsubishi A6MZERO FIGHTER Build Instructions

Hide thumbs Also See for Mitsubishi A6MZERO FIGHTER:

Advertisement

Quick Links

Download this manual
Your 1:18 model of the Japanese Zero is reproduced in the most exquisite
detail, with electronics allowing you to recreate aeronautical operations such
as take-off and landing, turning, firing and night combat. Lights, machine-gun
and propeller sounds bring your legendary fighter plane to life.
STAGE 93: ASSEMBLING THE SWITCH UNIT
AND THE DISPLAY PEDESTAL
STAGE 94: STAGE 94: ATTACHING FUSELAGE
PANELS , WING GUNS AND PITOT TUBES
STAGE 95: CHARGING UNIT ASSEMBLY
STAGE 96: INSTALLING THE INFRARED
RECEIVER AND ASSEMBLING THE DISPLAY
PANEL
© 2020 Hachette Partworks Ltd.
North America Edition by Agora Models
Pack 12 | Build Instructions
In your twelth model pack, you will assemble:
STAGE 97: CHECKING THE BATTERY
STAGE 98: ASSEMBLING THE DISPLAY
PEDESTAL AND BATTERY CASE
STAGE 99: ASSEMBLING THE DISPLAY
PEDESTAL
STAGE 100: FINISHING THE MODEL AND THE
DISPLAY PEDESTAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the Mitsubishi A6MZERO FIGHTER and is the answer not in the manual?

Questions and answers

Related Manuals for Agora Models Mitsubishi A6MZERO FIGHTER

Summary of Contents for Agora Models Mitsubishi A6MZERO FIGHTER

  • Page 1 STAGE 99: ASSEMBLING THE DISPLAY STAGE 95: CHARGING UNIT ASSEMBLY PEDESTAL STAGE 96: INSTALLING THE INFRARED STAGE 100: FINISHING THE MODEL AND THE RECEIVER AND ASSEMBLING THE DISPLAY DISPLAY PEDESTAL PANEL © 2020 Hachette Partworks Ltd. North America Edition by Agora Models...
  • Page 2 There are excellent videos showing how to build the Zero here. Advice from the experts Spare screws are included with each part. Occasionally, you may be instructed to keep spare or unused screws for a later stage. Keep these spares in a safe place and label them correctly. Please make sure you don’t mix up the screws.

  • Page 3: Switch Unit

    組み立てガイ ド Stage 93: Assembling the Switch Unit and the Display Pedestal Stage 93 Assembly In this stage we’ll be attaching a switch unit to the display pedestal frame. When doing so, take the opportunity to Switch Unit ensure all of the parts are securely fastened. STAGE 93 PARTS PARTS LIST Part...
  • Page 4 組み立てガイ ド ：Glue STEP 1 Assembling the switch unit ：Don’t Glue 093-01 093-02 071-06 093-06 STEP 2 Assembling the pedestal frame 091-01 093-03 AGORAMODELS A6M ZERO...
  • Page 5 組み立てガイ ド 089-06 089-05 093-06 093-04 STAGE COMPLETE AGORAMODELS A6M ZERO...
  • Page 6 組み立てガイ ド Stage 94: Attaching Fuselage Panels, Wing Guns and Pitot Tubes In this stage we’ll be attaching panels Stage 94 Assembly to the fuselage and 20 mm machine Fuselage panel, wing guns, Pitot tube guns and pitot tubes to the wings. We’ll also insert the top side panels to the wings, completing the aircraft.
  • Page 7 組み立てガイ ド ：Glue STEP 1 Attaching the fuselage panels, 20 mm machine guns and Pitot tubes ：Don’t Glue 094-02 094-01 094-03 094-04 STEP 2 Attaching the top outer panels to the wings 092-02 090-02 090-01 092-01 AGORAMODELS A6M ZERO...
  • Page 8 組み立てガイ ド STEP 3 Attaching wing panels, cockpit antenna and aileron control rod covers 094-06 094-07 094-10 094-05 094-09 094-07 094-08 NOTE 094-08 094-09 Front Back 094-05 094-06 STAGE COMPLETE AGORAMODELS A6M ZERO...

  • Page 9: Charging Unit

    組み立てガイ ド Stage 95: Charging Unit Assembly Stage 95 Assembly In this stage we’ll assemble the charging unit for the display pedestal. When installing the circuit board to its holder make Charging Unit sure the circuit board is facing the right direction. STAGE 95 PARTS PARTS LIST Part...
  • Page 10 組み立てガイ ド ：Glue STEP 1 Installing the charging unit circuit board ：Don’t Glue NOTE 095-02 095-03 095-03 095-01 091-05 STAGE COMPLETE AGORAMODELS A6M ZERO...
  • Page 11 Stage 96: Installing the Infrared Receiver and Assembling the Display Panel Stage 96 Assembly In this stage we’ll be mounting the infrared receiver Infrared receiver/Pedestal to the display panel. This device is crucial to ensuring the A6M Zero’s special features function properly as it receives signals from a remote control.
  • Page 12 組み立てガイ ド ：Glue STEP 1 Installing the infrared receiver circuit board ：Don’t Glue 089-04 096-01 089-06 089-04 096-04 089-04 089-06 STEP 2 Assembling the display panel 071-06 091-02 096-03 AGORAMODELS A6M ZERO...
  • Page 13 組み立てガイ ド 091-06 091-03 091-06 NOTE 091-06 096-05 096-02 When placing the charging unit on the base plate it’s easier to slide it in from the side. STAGE COMPLETE AGORAMODELS A6M ZERO...
  • Page 14 組み立てガイ ド Stage 97: Checking the Battery Stage 97 Assembly The battery used to power all of the electronics on the model Battery has been included with this stage. Be careful when handling it as the battery is delicate - if you drop it or it receives some sort of physical shock it may not work properly.
  • Page 15 組み立てガイ ド Stage 98: Assembling the Display Pedestal and Battery Case Stage 98 Assembly In this stage we’ll attach the final part of the display Pedestal/Battery Case pedestal frame, insert the battery into its case and do a bit more work on the display pedestal itself. STAGE 98 PARTS PARTS LIST Part...
  • Page 16 組み立てガイ ド ：Glue STEP 1 Assembling the display pedestal ：Don’t Glue 098-01 098-07 071-06 098-01 079-09 098-01 061-04 098-02 079-06 098-07 071-06 098-03 098-01 098-01 093-05 093-06 061-04 AGORAMODELS A6M ZERO...
  • Page 17 組み立てガイ ド STEP 2 Installing the battery case 098-09 097-01 098-04 098-05 098-08 098-07 AGORAMODELS A6M ZERO...
  • Page 18 組み立てガイ ド STAGE COMPLETE AGORAMODELS A6M ZERO...
  • Page 19 組み立てガイ ド Stage 99: Assembling the Display Pedestal Stage 99 Assembly In this stage we’ll be installing the circuit board used to control all of the A6M Zero’s electronics in the display Pedestal pedestal and then connecting everything up. STAGE 99 PARTS PARTS LIST Part Material...
  • Page 20 組み立てガイ ド ：Glue STEP 1 Installing the circuit board ：Don’t Glue 099-02 099-01 091-04 NOTE Make sure the switch is in the off position before connecting everything up. 099-01 095-01 AGORAMODELS A6M ZERO...
  • Page 21 組み立てガイ ド STAGE COMPLETE AGORAMODELS A6M ZERO...
  • Page 22 組み立てガイ ド Stage 100: Finishing the Model and the Display Pedestal Stage 100 Assembly In this stage we’ll attach the decals to the fuselage and Fuselage/Pedestal wings, place the top board on the display pedestal and then... that’s it, the A6M Zero is done! Test the controls and make sure everything’s working properly then have fun with all of the movement, lights and sound! STAGE 100 PARTS...
  • Page 23 組み立てガイ ド ：Glue STEP 1 Attaching the decals ：Don’t Glue Vertical stabiliser (military symbol, aircraft no., 088-09 unit abbreviation) 090-03 Wings – top side Right Left 092-03 Fuselage sides Front Left Centre Right 094-11 Wings – under side Rear 094-12 Fuselage strips NOTE The backing for the larger decals...
  • Page 24 組み立てガイ ド ガイド線 AGORAMODELS A6M ZERO...
  • Page 25 組み立てガイ ド Panel line 前 （Centre） 094-12 （Left） （Right） 094-12 094-12 後 094-12 White guide line Cut here Right Left 088-09 NOTE There’s a yellow guide line on the vertical stabilizer which is where you should attach the left half of 088-09 (L).
  • Page 26 組み立てガイ ド STEP 2 Placing the top frame on the display pedestal, then positioning the A6M Zero 100-02 100-01 STAGE COMPLETE AGORAMODELS A6M ZERO...
  • Page 27 組み立てガイ ド Zero Fighter Manoeuvering How to charge the controller How to turn on the power AGORAMODELS A6M ZERO...

  • Page 28: How To Use The Remote Control

    組み立てガイ ド How to use the remote control Power switch Engine stop Engine start The engine stops. Engine start Engine stop The propeller starts to rotate Landing with engine sound. The main landing gear and tail legs are deployed, and Take off the aircraft is ready for Take off...
  • Page 29 Zero Fighter Type 52: Moving parts and lights checklist Connector code Moving part/light Components Propeller 2-pole motor Cockpit interior light Left wing lights Right wing lights Left main landing gear limit switch Right main landing gear limit switch Left wing 20mm machine gun Right wing 20mm machine gun Left main landing gear motor 2-pole motor...
  • Page 30 Display base problems Possible causes Check points and Reference issues troubleshooting Initialisation procedures do Faulty base board, faulty Check the wiring. See stages 97, 99. not run when the base is battery, incorrect wiring →If it still doesn't work, replace switched on the base board and battery.
  • Page 31 Display base problems Possible causes Check points and Reference issues troubleshooting Nothing works except for the The power connector joining Make sure the power connector See stages 56, 95 vertical lifting devices the display base to the rear of base has not been damaged or the fuselage has been severed disconnected...
  • Page 32 Problem with the aircraft Possible causes Check points and Reference issues troubleshooting Propeller not moving, possible Fault with the aircraft's internal Remove the engine from the See stages 11, 15, 49, 64 motor failure board, faulty connector in the aircraft, connect to the battery engine, faulty cable leading box and check operation from the board to the...
  • Page 33 Problem with the aircraft Possible causes Check points and Reference issues troubleshooting Faulty propeller parts Faulty assembly, faulty parts Replace parts See stages 1, 11, 15 (insertion point is too wide and hangs down under weight) The tail gear doesn't move Interference of tail light cable Adjust so that the tail light See stages 50, 51, 53, 55...
  • Page 34 Die-Cast Zero Fighter Type 52 Model WITH MOTION, LIGHT AND SOUND EFFECTS Checking effects operation and maintenance Applying grease to the vertical lift shafts STEP 1 AGORAMODELS A6M ZERO...
  • Page 35 Checking the circuit board STEP 2 Make sure the date printed on the board is "19/10/11". If a different date is displayed, then contact the customer service team. Making sure the display base operates properly STEP 3 AGORAMODELS A6M ZERO...
  • Page 36 What to do if one of the vertical lifts isn’t working properly Spacer AGORAMODELS A6M ZERO...
  • Page 37 Mounting the aircraft onto the display base STEP 4 Place the left and right wings of the aircraft onto the two vertical support shafts at the front of the base, attaching the connection point on the rear of the aircraft to the corresponding connector on the base. Turn the display base switch on, then turn on the power switch on the remote control.