Growatt ARK 5.12~25.6XH-A1 Quick Installation Manual

5-2
ARK 2.5H-A1 Connection end face introduction
LINK0 Series
1
Communication Port
LINK1 Series
2
Communication Port
Module negative
3
terminal
4 Module positive terminal
1 2
3 4 5 6 7
5-3
Diagram of wiring connection
To PCS
To PCS
Rs485 Battery- Battery+ PE Rs485 Battery- Battery+ PE
Insert Plug
ARK 2.5H-A1 Series cable
Note: It is not recommended to install a DC circuit breaker between the battery system and the hybird inverter system,
If you want to install a DC circuit breaker with rated working voltage grearer than 1000V and rated working current greater
than 63A, do not operate the DC circuit breaker with power on, otherwise the machine may be damaged.
5-4
Communication port connection
BDC 95045-A1
Silk screen Terminal serial number Definition Silk screen Terminal serial number
1 WAKE-(W-)
2 WAKE+(W+)
INV SYS COM
7 RS 485_B (B)
8 RS 485_A(A)
Communication line
SYS COM "1" to "W-"
SYS COM "2" to "W+"
SYS COM "7" to "B"
SYS COM "8" to "A"
A
Connector
BDC 95045-A1
Silk screen Terminal serial number Definition Silk screen Terminal serial number
1 WAKE-(W-)
2 WAKE+(W+)
INV COM
7 RS 485_B (B)
8 RS 485_A(A)
5 GND terminal
6 Safety vent
7 GND terminal
Connector
ARK XH Battery Cable

6.Terminal Connection

6-1 Power terminal
Insert Plug

7.Battery system switch operation

MIN TL-XH
Power on battery system:
Turn the circuit breaker to the "ON" state, press the
Definition
POWER button for 5-6 seconds, wait for the battery
system LED light to light up, indicating that the boot
1 BAT.EN-
is complete.
2 BAT.EN+
7 RS 485_B

8.Key operation

8 RS 485_A
Power Button
Situation
B
System of f
Note: When multiple battery syetem are used in parallel connection, you only need to press one key of any module to start the system.
9.Service and contact
Shenzhen Growatt New Energy Co., Ltd
MOD TL3-XH
4-13/F,Building A,Sino-German(Europe) Industrial Park,
Hangcheng Ave,Bao'an District, Shenzhen, China
Definition
86 0755 2747 1942
10 BAT.EN-
W:www.ginverter.com
9 BAT.EN+
8 RS485B2
7 RS485A2
5
B
Communication line
A COM "10" to "W-"
COM "9" to "W+"
COM "8" to "B"
COM "7" to "A"
Note: Press the position indicated in the figure above before disconnecting the power terminal.
Power ON battery system
Power OFF battery system
Power off battery system:
Turn the breaker of to "OFF" to turn off the entire battery
system.
Touch Definition
Press
Press(≥5S) Power on
service@ginverter.com
Installation environment
Max.+50℃
Installation tools
System size
BDC95045-A1
ARK 2.5H-A1
1.Check
1- 1 Check BDC 95045-A1 List
1-2
Check ARK 2.5H-A1 List
Growatt New Energy
6
ARK 5.12~25.6XH-A1
Quick Installation Manual
Min.-10℃ RH.+5%~+95%
*
*
BDC 95045-A1
*
* *
* *
ARK 2.5H-A1 1 Serial cable 1
* *
1