Using The Answering Machine Connection - Sharp UX-P400 Operation Manual

Using the Answering Machine Connection

Using the Answering Machine Connection
1
Set the reception mode to A.M.
2
Set your answering machine to auto
answer.
Your answering machine must be set to answer on a maximum of two rings.
If not, you may not be able to receive faxes sent by automatic dialling.
Note: If your answering machine has a remote retrieval function, make sure the
code used to activate remote retrieval is different from the code used to activate
fax reception with an extension telephone (see Chapter 3, Receiving Faxes). If
they are the same, entering the code from an outside telephone to retrieve
messages will cause the fax machine to be activated.
52
AUFLÖS./
EMPFANG
TEL FAX
TEL/FAX AB