Sending A Fax By Normal Dialling - Sharp UX-P400 Operation Manual

Sending a Fax by Normal Dialling

With Normal Dialling, you pick up the handset (or press
pressing the number keys.
If a person answers, you can talk with them through the handset before
sending the fax. (If you pressed
Normal Dialling allows you to listen to the line and make sure the other fax
machine is responding.
1
Load the document(s).
If desired, press
resolution and/or contrast.
2
Pick up the handset or press
Listen for the dial tone.
3
Dial the number of the receiving
machine by pressing the number keys.
If you are on a Flash-type PBX and are
dialing out, press
connection to the outside line, and then
dial the number.
4
Wait for the connection. Depending on the setting of the receiving
machine, you will either hear a fax tone or the other person will answer.
, you must pick up the handset to talk.)
AUFLÖS./
to set the
EMPFANG
.
R
, wait for the
Sending a Fax by Normal Dialling
) and dial by
READY TO SEND
ABC
1
GHI JKL
4
TUV
PQRS
7
or
DEF
2 3
MNO
5 6
WXYZ
8 9
0
29