Rapid Key Dialing - Sharp UX-B700 Operation Manual

Rapid Key Dialing

If the number you want to dial has been stored as a Speed Dial number from
01 to 18, you can dial it by pressing the corresponding Rapid Key.
1
Load the document(s).
•
If desired, press
the resolution and/or contrast.
2
Press the Rapid Key corresponding to
the desired Speed Dial number.
•
The name of the receiving party will
appear in the display. If no name was
stored, the fax number will appear. (If
the name or number is incorrect, press
.)
STOP
•
The document will be automatically
transmitted once the connection is
established.
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 87).
Using a Rapid Key for a voice call
To use a Rapid Key for a voice call, simply lift the handset and then press the
Rapid Key.
Sending a Fax by Automatic Dialing
to set
RESOLUTION/
RECEPTION MODE
READY TO SEND
01
Example: To dial Speed
Dial number 01, press
Rapid Key 01.
45