Manual Clock Setting; Automatic Daylight Saving-Time (Dst) Adjustment - Sharp DV-HR300U Operation Manual

Manual Clock Setting

1
Press START MENU to display
the START MENU screen.
2
Press ' / " / \ / | to select
"OTHER SETTINGS", then press
SET/ENTER.
3
Press \ / | to select "ADJUST-
MENT".
4
Press ' / " to select "CLOCK
SETTING", then press SET/
ENTER.
5
Press ' / " to select "MANUAL
SETTING", then press SET/
ENTER.
OTHER SETTINGS[CLOCK SETTING]
AUTO SETTING
SET CLOCK MANUALLY
MANUAL SETTING
TIME DATE
10 28 AM 12 / 25
:
SET
6
Press \ / | to select "TIME" and
press ' / " to set time.
7
Select and set "DATE", "YEAR"
and "DST" in the same manner as
in step 6 .
• See "Automatic Daylight Saving-Time
(DST) Adjustment".
Example: Dec. 25, 2004, DST: ON
OTHER SETTINGS[CLOCK SETTING]
AUTO SETTING
SET CLOCK MANUALLY
MANUAL SETTING
TIME DATE
10 : 28 AM 12 / 25
SET
8
If the data is correct, press | to
select "SET", then press SET/
ENTER to complete clock setting.
Press EXIT to return to normal
screen.
• The screen returns to normal.
NOTE
• If you press RETURN, START MENU or
EXIT before pressing SET/ENTER in step
8 , the data will not be stored.
Automatic Daylight
Saving-Time (DST)
Adjustment
This Recorder is equipped with an internal
Automatic Daylight Saving-Time Adjustment
function. In spring (first Sunday in April) and
autumn (last Sunday in October), the time is
adjusted as shown below. This function has
been preset to "ON" at the factory. Set the
DST mode in the "CLOCK SETTING" screen.
Spring
Programmed timer recording set within this
time frame (2:00 AM to 3:00 AM) will not be
carried out.
First Sunday in April (DST is ON)
1 / 2 5 2 SAT 1 : 0 8 2 AM
YEAR DST
[ SAT ] 2004 ON
Autumn
Because there will be two time frames from
1:00 AM to 2:00 AM, a timer program set
between these time frames will be influenced
by the time change.
Last Sunday in October (DST is ON)
1 / 2 5 2 SAT 1 : 0 8 2 AM
YEAR DST
[ SAT ] 2004 ON
NOTE
• If the timer recording program is affected
by the DST time change, check your TV
listing and find out when it reflects the time
change. Some TV listings will indicate the
time change in the same manner as is
programmed in this Recorder while others
do not show the time change until the next
morning. In that case, when programming
a timer recording, use the "CLOCK
SETTING" screen to set the DST mode to
OFF so the time change will not be carried
out.
Clock Setting
1:00 AM 2:00 AM
The clock is automatically
advanced 1 hour.
3:00 AM 4:00 AM
1:00 AM 2:00 AM
The clock is automatically
set back 1 hour.
1:00 AM 2:00 AM
31