Connection Guide; Selecting The On-Screen Display Language; Selecting The Tv Terminal; Selecting The Tv Screen Aspect Ratio - Sharp DV-HR300U Operation Manual

Connection Guide

Before using the Recorder, use the
Connection Guide function for easy initial
settings regarding TV connection, on-screen
language, etc.
Preparation
•Turn on the power of TV.
•Switch TV input to the AV input used to
connect to the Recorder.
1
Press and hold CONNECTION
GUIDE for more than 2 seconds.
Selecting the On-screen
Display Language
2
Press ' / " to select the lan-
guage you want to use.
OSD LANGUAGE
SELECT OSD LANGUAGE
ENGLISH
FRANÇAIS
NOTE
•You can change On-Screen Display
Language afterward using the Connection
Guide function.
3
Press SET/ENTER.
•The "START TV SET UP" screen with
"OK" button is displayed.
CONNECTION GUIDE
START TV SET UP.
SETUP CAN BE CHANGED AFTERWARD.
OK
4
Press SET/ENTER.
•The "SELECT TV TERMINAL" Select
screen is displayed.
NOTE
•Press RETURN to go back to the preced-
ing screen during the setting procedure.

Selecting the TV Terminal

5
Press ' / " to select the type of
video input terminal on the
connected TV.
CONNECTION GUIDE
SELECT TV TERMINAL
6
Press SET/ENTER.
•The "SELECT TV MODE" screen is
Selecting the TV Screen
Aspect Ratio
1 / 2 5 2 SAT 1 : 0 8 2 AM
7
Press ' / " to select the screen
aspect ratio of the connected TV.
CONNECTION GUIDE
SELECT TV MODE
8
Press SET/ENTER.
•The "ADVANCED SETTINGS"
9
Press \ / | to select "YES" or
"NO", then press SET/ENTER.
1 / 2 5 2 SAT 1 : 0 8 2 AM
CONNECTION GUIDE
ADVANCED SETTINGS
• When "YES" is selected
• When "NO" is selected
1 / 2 5 2 SAT 1
VIDEO
S-VIDEO
COMPONENT (Y, PB, PR)
displayed.
1 / 2 5 2 SAT 1
WIDE 16:9
NORMAL 4:3
Confirmation screen is displayed.
1 / 2 5 2 SAT 1
YES NO
The "ADVANCED SETTINGS" screen
is displayed. Proceed to step 10 .
The "INITIAL SETTING COMPLETE"
screen with "OK" button is displayed.
Proceed to step 17 .
Continued on Next Page |||
: 0 8 2 AM
: 0 8 2 AM
: 0 8 2 AM
27