Sharp DV-HR300U Operation Manual page 68

HDD Playback
68
Switching Audio
You can change the audio output channel
during HDD playback.
Each time AUDIO is pressed, the
audio channels change.
• The way audio channels change differs
depending on the sound recorded on HDD.
See the table of SAP on page 99 for details.
NOTE
• When you play a program recorded in dual
mono, and if you are listening to the Dolby
Digital sound via the digital output jack,
you cannot select the audio channel. Set
"DIGITAL AUDIO OUTPUT" to "PCM" (see
page 102, or if you want to change the
audio channel, listen via the analog output
jacks.
Zoom
You can magnify your favorite section.
Press ZOOM during playback.
• Each time you press this button, the zoom
setting cycles in the following sequence:
ZOOM: 1 (approx. 1.2✕) → ZOOM: 2
(approx. 1.5✕) → ZOOM: 3 (approx. 2.0✕)
→ OFF: (No display).
• You can move the enlarged part with '
" " " " " / \ \ \ \ \ / | | | | | .
• Zoom will not work during Time Shift
Viewing.
To return to the normal screen, press
ZOOM a few times and cancel Zoom mode.
Repeat Playback of a Title
or Chapter (Repeat Play-
back)
1
Play back the title or chapter you
want to repeat.
2
Press (INPUT).
3
Press \ / | to select the type of
Repeat Playback.
• TITLE: Repeats the title currently
playing back.
• CHAPTER: Repeats the chapter
currently playing back.
• A-B: Repeats the specified scene of
title or chapter.
SELECT TYPE OF REPEAT PLAYBACK.
TITLE CHAPTER
\ | SELECT
ENTER
ENTER
• Press RETURN to cancel without
setting the type of Repeat Playback.
4
Press SET/ENTER.
Example: Repeat playback of a title
(TITLE)
5
Press
normal playback.
A-B Repeat Playback
(Repeat Playback of a
Specified Part)
1
Press
playback.
2
Press \ / | to select "A-B", then
press SET/ENTER.
3
Press SET/ENTER when you
reach the scene you want to start
Repeat Playback.
ZOOM: 1
• The start point of the part (A) will be
memorized.
' ' ' ' /
4
Press SET/ENTER when you
reach the scene you want to end
Repeat Playback.
• The end point of the part (B) will be
memorized and the Repeat Playback
for the specified part (A-B) starts.
5
Press
normal playback.
NOTE
• For A-B Repeat Playback, set the start and
end points within the same title.
A-B
TITLE REPEAT
(INPUT) to return to
(INPUT) during
SELECT TYPE OF REPEAT PLAYBACK.
TITLE CHAPTER A-B
SET START PT
SET REPEAT START POINT
ENTER
(INPUT) to return to