Canon TU-06 Setup Manual page 22

9
Plug the Media Take-up Sensor cord into the Right Media Take-up Unit.
0
Attach the cord holders (a) to the holes of the Top Stand Stay. Bring the power cord of the
Right Media Take-up Unit to the back of the printer and pass the cord through the cord
holders. After passing the cord behind the holders, plug the cord into the Power Supply
Connector on the back of the printer.
Caution
•
When plugging in the power cord, be careful about the positions of the prongs. It
may damage the cord or connector if you force the cord into the connector.
a
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
6