Philips HD6163 Manual page 8

ENGLISH
10
Cleaning
Let the oil or fat cool down for at least 4 hours before you clean or move the fryer.
Do not use any abrasive (liquid) cleaning agents or materials (e.g scouring pads) to clean
the appliance.
Never immerse the control panel with the heating element in water nor rinse it under the tap.
Note: All parts except the control panel with the heating element can be cleaned in the dishwasher or in
hot water with some washing-up liquid.
1 Take the lid off the appliance. (Fig. 12)
2 Remove the basket from the fryer.
3 Remove the control panel with the heating element from the fryer and put it in a safe, dry
place. (Fig. 16)
If necessary, clean this part with a moist cloth.
4 Lift the inner bowl out of the appliance and pour out the oil or fat (Fig. 17).
5 Clean the housing, the inner bowl, the lid and the frying basket in hot water with some
washing-up liquid or in the dishwasher.
6 Rinse the parts with fresh water and dry them thoroughly.
Storage
Let the oil or fat cool down for at least 4 hours before you clean or move the fryer.
1 Put all parts back into/onto the fryer and put the lid on the fryer.
- You can fold the handle of the frying basket for easy storage. (Fig. 18)
2 Roll up the cord, put it in the cord storage compartment and insert the cord in the cord
3 Lift the fryer by its handles and store it (Fig. 20).
- Do not throw away the appliance with the normal household waste at the end of its life, but
environment (Fig. 21).
If you need service or information or if you have a problem, please visit the Philips website at
go to your local Philips dealer.